Boen_Shi 8be2866433 feat(base): 初始化 MSPM0 开发环境
- 添加头文件和配置文件支持
- 更新.gitignore忽略编译和IDE相关文件
- 添加基础的bsp代码
2026-07-16 14:45:26 +08:00

173 lines
5.2 KiB
C

/*
* Copyright (c) 2023, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* * Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <ti/driverlib/dl_lcd.h>
#ifdef __MSPM0_HAS_LCD__
/**
* @brief LCD APIs
*/
void DL_LCD_init(LCD_Regs *lcd, const DL_LCD_Config *config)
{
DL_Common_updateReg(&lcd->LCDCTL0,
(uint32_t) config->frequencyDivider | (uint32_t) config->muxRate |
(uint32_t) config->lowPowerWaveform,
LCD_LCDCTL0_LCDDIVX_MASK | LCD_LCDCTL0_LCDMXX_MASK |
LCD_LCDCTL0_LCDLP_MASK);
}
void DL_LCD_setPinAsLCDFunction(LCD_Regs *lcd, uint32_t pin)
{
lcd->LCDCTL0 &= ~(LCD_LCDCTL0_LCDON_MASK); /* turn off LCD module */
uint8_t idx = pin >> 4; /* get index in corresponding port control reg */
uint16_t val = 1 << (pin & 0x0F); /* get mask to set that specific bit */
switch (idx) {
case 0:
lcd->LCDPCTL0 |= val;
break;
case 1:
lcd->LCDPCTL1 |= val;
break;
case 2:
lcd->LCDPCTL2 |= val;
break;
case 3:
lcd->LCDPCTL3 |= val;
break;
default:
break;
}
}
void DL_LCD_setPinAsPortFunction(LCD_Regs *lcd, uint8_t pin)
{
lcd->LCDCTL0 &= ~(LCD_LCDCTL0_LCDON_MASK); /* turn off LCD module */
uint8_t idx = pin >> 4; /* get index in corresponding port control reg */
uint16_t val = 1 << (pin & 0x0F); /* get mask to set that specific bit */
switch (idx) {
case 0:
lcd->LCDPCTL0 &= ~(val);
break;
case 1:
lcd->LCDPCTL1 &= ~(val);
break;
case 2:
lcd->LCDPCTL2 &= ~(val);
break;
case 3:
lcd->LCDPCTL3 &= ~(val);
break;
default:
break;
}
}
void DL_LCD_setPinAsCommon(LCD_Regs *lcd, uint8_t pin, uint32_t com)
{
lcd->LCDCTL0 &= ~(LCD_LCDCTL0_LCDON_MASK);
/* If pin value is > 64, then exit function*/
if (pin > 64) {
return;
}
uint8_t idx = pin >> 4; /* 0-15 -> 0, 16-31 -> 1, etc. */
uint16_t val = 1 << (pin & 0x0F); /* getting mask for val based on pin */
uint8_t muxRate = lcd->LCDCTL0 & (LCD_LCDCTL0_LCDMXX_MASK);
switch (idx) {
case 0:
lcd->LCDCSSEL0 |= val;
break;
case 1:
lcd->LCDCSSEL1 |= val;
break;
case 2:
lcd->LCDCSSEL2 |= val;
break;
case 3:
lcd->LCDCSSEL3 |= val;
break;
default:
break;
}
/* Set LCDMem to COM as well for corresponding pins */
if ((muxRate == LCD_LCDCTL0_LCDMXX_MX_STATIC) ||
(muxRate == LCD_LCDCTL0_LCDMXX_MX_2) ||
(muxRate == LCD_LCDCTL0_LCDMXX_MX_3) ||
(muxRate == LCD_LCDCTL0_LCDMXX_MX_4)) {
if (pin & 1) {
/* upper nibble */
lcd->LCDM[pin / 2] |= (com & 0xF) << 4;
} else {
/* lower nibble */
lcd->LCDM[pin / 2] |= (com & 0xF);
}
} else {
/* 5-mux, 6-mux, 7-mux, 8-mux, whole byte per segment pin */
lcd->LCDM[pin] |= com;
}
}
void DL_LCD_setPinAsSegment(LCD_Regs *lcd, uint8_t pin)
{
lcd->LCDCTL0 &= ~(LCD_LCDCTL0_LCDON_MASK);
uint8_t idx = pin >> 4; /* 0-15 -> 0, 16-31 -> 1, etc. */
uint16_t val = 1 << (pin & 0x0F); /* getting mask for val based on pin */
switch (idx) {
case 0:
lcd->LCDCSSEL0 &= ~val;
break;
case 1:
lcd->LCDCSSEL1 &= ~val;
break;
case 2:
lcd->LCDCSSEL2 &= ~val;
break;
case 3:
lcd->LCDCSSEL3 &= ~val;
break;
default:
break;
}
}
#endif /* __MSPM0_HAS_LCD__ */